Step 1 Assemble units of four small rings on one large ring. Eleven of these units will give you a 14 inch necklace.
	Step 2 Connect the units from Step 1 with chains of seven medium rings.
	Step 3 Starting at the left end of a connecting chain, hold the first medium ring steady in your left hand, then twist the chain counter-clockwise to make the rings twist and overlap.
	Step 4 Lock the overlapped rings in place with a new medium ring.
	Step 5 Repeat Steps 3-4 with the next rings in the chain.
	Step 6 Again, lock the overlapped rings in place with a new medium ring.
	Step 7 Repeat again for the last rings in the connecting chain and you've completed one 4-in-1 section! Repeat steps 3-7 for the remaining connector chains.
	Step 8 Widen the 4-in-1 section by adding a new medium ring through two existing rings...
	Step 9 ... and again.
	Step 10 The widened 4-in-1 sections, ready for beads to be added.
	Step 11 Use the same new medium ring to bring the 4-in-1 section to a point and also to hang the bead. Hang all the beads in this way.
	Step 12 Add the clasp and adjustment chain. Clasp at the base of the adjustment chain for a high choker, and at the end of the adjustment chain for a lower collar-level necklace.